Velocity measurement based on inertial measuring unit

Waru Djuriatno, Eka Maulana, Hasan Hasan, Effendi Dodi Arisandi, Wijono Wijono

Abstract


Vehicles technology have been a priority area of research over the last few decades. With the increasing the use of electronic components in the automotive industry to measure conditions around the vehicle, the focus of automotive technology development is now leading to the development of active technology. Information on the speed of conventional vehicles is generally still obtained based on the rotation of the wheel, but there are weakness in the system that is the diference between wheel and road through vehicle also changes wheel radius of the vehicle due to wind tube air preasure that can change at any time. In this research used Inertial Measuring Unit (IMU) 6 axis (accelerometer and gyroscope) which have been done filtering by using Kalman filter in order to make output sensor value more stable, results obtained at the test of 0 m/s had an RMS error of 0.8696 m/s when elevation is +450; 0.0393 m/s when elevation is 00; and 0.3030 m/s when elevation is -450. this research is expected to be an exploration for the development of a decent system that is suitable to be used as vehicle speed estimator which is as reliable as it is by using an existing speedometer on a ground vehicle generally regardless of slippage and changes in wind capacity on wheels.

Keywords


inertial measuring unit; Kalman filter; velocity;

Full Text:

PDF


DOI: http://doi.org/10.12928/telkomnika.v17i4.11826

Refbacks

  • There are currently no refbacks.


Creative Commons License
This work is licensed under a Creative Commons Attribution-ShareAlike 4.0 International License.

TELKOMNIKA Telecommunication, Computing, Electronics and Control
ISSN: 1693-6930, e-ISSN: 2302-9293
Universitas Ahmad Dahlan, 4th Campus
Jl. Ringroad Selatan, Kragilan, Tamanan, Banguntapan, Bantul, Yogyakarta, Indonesia 55191
Phone: +62 (274) 563515, 511830, 379418, 371120
Fax: +62 274 564604

View TELKOMNIKA Stats