Characteristics Analysis of Non-linear Torsional Vibration in Engine and Generator Shafting system

Wei Zhang, Wenming Zhang, Xuan Zhao, Miaomiao Guo

Abstract


To solve the non-linear torsional vibration problem of engine and generator shafting causing body structural vibration and noise in motorized wheel vehicle, where the engine and the generator connected directly. First of all, analysis the characteristics of the shafting system, besides the external shock excitation of engine and generator. Then, through lumped parameter model method, mathematical model of the non-linear torsional vibration was established, which could reflect the dynamic characteristics of the system. Analysis the effect of mechanical parameters and electromagnetic parameters on the shafting. And get the non-linear differential equations of the system torsional vibration, which expresses the relation between structural parameters, electromagnetic parameters and the system dynamic characteristics. And multiple scales method was used to solve the equations. Non-contact measurement method was used in the torsional vibration test. Finally, consistency of the results, indicate that the research method used is reliability and accuracy, and get the critical speed of the shafting torsional vibration.

Full Text:

PDF

References


Bedoor B O, Moustafa K A, Hussain K M, "Dual dynamic absorber for the torsional vibrations of synchronous motor-driven compressors". In Journal of sound and vibration.1999; vol.220(no.4): pp.729-748.

Fukuda S, Eto H. "Development of fracture splitting connecting rod". In JSAE Review. 2002;vol. 23(no.1): pp.101-104.

Charles P, Sinha J K, Gu F, et al. "Detecting the crankshaft torsional vibration of diesel engines for combustion related diagnosis". In Journal of Sound and Vibration. 2009;vol.321(no.3):pp. 1171-1185.

Boysal A, Rahnejat H. "Torsional vibration analysis of a multi-body single cylinder internal combustion engine model". In Applied Mathematical Modelling.1997; vol.21(no.8): pp.481-493.

Östman F, Toivonen H T. "Active torsional vibration control of reciprocating engines". In Control Engineering Practice. 2008; vol.16(no.1): pp.78-88.

Brusa E, Delprete C, Genta G. "Torsional vibration of crankshafts: effects of non-constant moments of inertia". In Journal of Sound and Vibration. 1997; vol.205(no.2): pp.135-150.

Li Z, Gui C L, Sun J. "Review of the researches on vibrations of crankshaft system in internal combustion engines". In Transactions of Chinese Society for Internal Combustion Engines. 2002; vol.20(no.5): pp.469-474.

Ma C, Zuo S G, Tan Q W, et al. "Non-linear torsional vibration model of a PMSM for electric driven vehicle". In Journal of Vibration and Shock. 2013; vol.32 (no.12): pp.131-134.

Christopher S, Keeney, Shan S. "Prediction and control of heavy duty powertrain torsional vibration ".in SAE922481:pp.279.

Zhou C Y, Xu Z C, You G Y, et al. "Analysis of rotor dynamics of engine-generator unit system". In Journal of Vibration and Shock. 2010; vol.9(no.s1):pp.163-167.

Liu H, Cai Z, Xiang C. "Dynamic characteristics of vehicular planetary gears influenced by engine excitation and backlash based on nonlinear torsional vibration model". In Springer Berlin Heidelberg, 2013:pp. 115-126.

Deighan T P, Whitehead T. "Driveline vibration analysis for successful clutch spring pack design for a 4 cylinder motorcycle engine". In SAE Technical Paper, 2013.

Szczepaniak, Kesy A, Kesy Z. "Damping performance of power transmission system with hydraulic torque converter".in Vehicle System Dynamics.1991;vol.20:pp.473-479.

Henao H, Kia S H, Capolino G A. "Torsional-vibration assessment and gear-fault diagnosis in railway traction system". In Industrial Electronics, IEEE Transactions on. 2011; vol. 58(no.5):pp.1707-1717.

Sung S H, Nefske D J, Chen F HK, et al. "Development of an engine system model for prediction structural vibration and radiated noise of the running engine".in SAE 972039.1999; vol.6: pp.611-613.

Mourelatos Z. "Crankshaft system model for structural dynamic analysis of internal combustion engines". in Computers & Structures. 2001;vol.6:pp.102-107.

Shangguan W B, Chen C, Duan X C, et al. "Modeling and experimental analysis of torsional vibration in engine crankshaft system". In Journal of Vibration, Measurement &Diagnosis. 2012; vol.32 (no.4): pp.560-567.

Nagar A, Chokkalingam V, Umashankar N, et al. "Improvement in crank train torsional vibration (TV) performance of multi-cylinder diesel engine". In SAE Technical Paper, 2013.

Li X Q, Wang G, Lv B L, et al. "Calculation method and characteristics analysis of torsional vibration of diesel generating set shaft system in short circuit condition". In Chinese Internal Combustion Engine Engineering. 2013; vol.34(no.2):pp.18-23.

Manin L, Dufour R, Schultz S. "Pulley torsional vibration damper characterization". in Mechanics & Industry. 2013;vol.14(no.2): pp.151-155.

Licari J, Ugalde-Loo C E, Ekanayake J B, et al. "Damping of torsional vibrations in a variable-speed wind turbine". in Energy Conversion, IEEE Transactions on. 2013; vol.28(no.1): pp.172-180.

Monroe R J, Shaw S W. "Nonlinear transient dynamics of pendulum torsional vibration absorbers—part I: theory". In Journal of Vibration and Acoustics. 2013; vol.135(no.1): pp.11-17.

Li Z, Sandhu J. "Transmission torque converter arc spring damper dynamic characteristics for driveline torsional vibration evaluation". In SAE International Journal of Passenger Cars-Mechanical Systems. 2013; vol.6(no.1):pp. 477-482.




DOI: http://doi.org/10.12928/telkomnika.v13i1.129

Refbacks

  • There are currently no refbacks.


Creative Commons License
This work is licensed under a Creative Commons Attribution-ShareAlike 4.0 International License.

TELKOMNIKA Telecommunication, Computing, Electronics and Control
ISSN: 1693-6930, e-ISSN: 2302-9293
Universitas Ahmad Dahlan, 4th Campus
Jl. Ringroad Selatan, Kragilan, Tamanan, Banguntapan, Bantul, Yogyakarta, Indonesia 55191
Phone: +62 (274) 563515, 511830, 379418, 371120
Fax: +62 274 564604

View TELKOMNIKA Stats