Buck converter controlled with ZAD and FPIC for DC-DC signal regulation

Fredy E. Hoyos Velasco, Yeison Alberto Garcés Gómez, John E. Candelo-Becerra

Abstract


This paper presents the performance of a fixed-point induction control (FPIC) technique working in conjunction with the non-linear control technique called zero average dynamics (ZAD) to control chaos in a buck converter. The control technique consists of a sliding surface in which the error tends to zero at each sampling period. A switch is controlled by using centered pulse width modulation (CPWM) control signal. The converter controlled with ZAD-FPIC has been simulated in Matlab and implemented using rapid control prototyping (RCP) in a DSP to make comparisons between simulation and experimental tests. To perform this comparison, some variations in the control parameter and the voltage reference are made in order to evaluate the performance of the system. Results are obtained with errors lower than 1 % which demonstrates the good performance of the control techniques.


Keywords


buck converter; DC-DC converter; fixed-point induction control; signal regulation; zero average dynamics;

Full Text:

PDF


DOI: http://doi.org/10.12928/telkomnika.v18i1.14108

Refbacks

  • There are currently no refbacks.


Creative Commons License
This work is licensed under a Creative Commons Attribution-ShareAlike 4.0 International License.

TELKOMNIKA Telecommunication, Computing, Electronics and Control
ISSN: 1693-6930, e-ISSN: 2302-9293
Universitas Ahmad Dahlan, 4th Campus
Jl. Ringroad Selatan, Kragilan, Tamanan, Banguntapan, Bantul, Yogyakarta, Indonesia 55191
Phone: +62 (274) 563515, 511830, 379418, 371120
Fax: +62 274 564604

View TELKOMNIKA Stats