Design and Modeling of an Integrated Micro-Transformer in a Flyback Converter
Abstract
This paper presents the design and modeling of a square micro-transformer for its integration in a flyback converter. From the specifications of the switching power supply, we determined the geometric parameters of this micro-transformer. The π-electrical model of this micro-transformer highlights all parasitic effects generated by stacking of different material layers and permits to calculate the technological parameters by using the S-parameters. A good dimensioning of the geometrical parameters reduces efficiently the energy losses in the micro-transformer and permits to reach the desirable value of the converter output voltage. We have also simulated the electromagnetic effects with the help of the software FEMLAB3.1 in two cases. The first case, without ferromagnetic core, the second case with ferromagnetic core, in order to choose the micro-transformer that has better electromagnetic compatibility with the vicinity components. To validate dimensioning of the geometrical and technological parameters, we have simulated with the help of the software PSIM6.0, the equivalent electrical circuit of the converter containing the electrical circuit of the dimensioned planar micro-transformer.
Full Text:
PDFReferences
V Boyer, N Godefroy. Alimentation à découpage Flyback. M1-IUP GEII. Université Joseph Fourier.
Q Laurent, Y Heinrich. Réalisation d'un convertisseur Flyback. Projet ENPU, INSA. Strasbourg.
JYs Le Chenadec. Alimentation à découpage, Etude, Choix et Dimensionnement des Alimentations à Découpage Usuelles. Lycée Louis ARMAND. Strasbourg.
P Gomes. Monolithic Power Combiners in CMOS technologies for WLAN applications. Instituto Superior Técnico. Universida de Técnica de Lisboa. 2011.
B Estibals, C Alonso, A Salles, J Schanen, R Perret. “Validation d’outils de simulation d’éléments inductifs pour convertisseur statique intégré“. Laboratoire d’Analyse et d’Architecture des Systèmes LAAS du CNRS. Toulouse et Laboratoire d’Electrotechnique de Grenoble. France.
Fu Keung Wong. High Frequency Transformer for Switching Mode Power Supplies. School of Microelectronic Engineering. Faculty of Engineering and Information Technology Griffith University. Brisbane. Australia. 2004.
A Ghannam. Conception et intégration "above IC" d’inductances à fort coefficient de surtension pour applications de puissance RF. Université Toulouse III– Paul Sabatier. 2010.
X Margueron. Elaboration sans prototypage du circuit équivalent de transformateurs de type planar. Laboratoire d'Electrotechnique de Grenoble. Université Joseph Fourier. 2006.
C Alonso. “Contribution à l’optimisation, la gestion et le traitement de l’énergie“. Université Paul Sabatier – Toulouse III. 2003.
D Kehrer. “Design of Monolithic Integrated Lumped Transformers in Silicon-based Technologie sup to 20 GHz”. Wien University. 2000.
R Thüringer. “Characterization of Integrated Lumped Inductors and Transformers”. Wien University. 2002.
Y Maycvskiy. Analysis and Modeling of Monolithic On-Chip Transformers on Silicon Substrates. Oregon State University. United States of America. 2005.
Shwetabh Verma, Jose M Cruz. “On-chip Inductors and Transformers”. SMLI TR-99-79. 1999.
YK Koutsoyannopoulos. Systematic Analysis and Modeling of Integrated Inductors and Transformers in RF IC Design. Analog and Digital Signal Processing. 2000; 47(8): 699.
Xun Liu, S Y Ron Hui. Equivalent Circuit Modeling of a Multilayer Planar Winding Array Structure for Use in a Universal Contactless Battery Charging Platform. IEEE transactions on power electronics. 2007; 22(1).
A Salles. Conception d’éléments passifs magnétiques pour convertisseurs de faible puissance. Université Toulouse III. Paul Sabatier. 2008.
S Musunuri, PL Chapman, J Zou, C Liu. Design Issues for Monolithic DC–DC Converters. IEEE Transactions On Power Electronics. 2005; 20(3).
Kharagpur. DC to DC Converters, Fly-Back Type Switched Mode Power Supply. Version 2 EE IIT.
Andreas Weisshaar. Analysis and Modeling of Monolithic On-Chip Transformers on Silicon. 2005.
Xu Daoxian. Characterization and modeling of Micro-wave spiral Transformers and inductors. Peking University. China. 2005.
O'Donnell, Magali Brunet, Paul McCloskey, Joe O’Brien, Seán Cian, Ó Mathúna. Micro transformers and Inductors using Permalloy Thin Films. Cork. Ireland.
B Allard, S Azzopardi, Jc crebier, Z Khatir, E Labouré, T Lebey, Jl sanchez.Enjeux Et Défis de L'intégration 3D en Électronique de Puissance. ISP3D.
Alberto M Pernía, Miguel J Prieto, Juan M Lopera. High Power Density DC/DC Converter Using Thick-Film Hybrid Technology . Universidad de Oviedo. Campus de Viesques. Gijón (Asturias). Spain.
K Ammous. Contribution à la construction systématique des modèles moyens de convertisseur de puissance. Institut national des sciences appliquées. Lyon. 2002.
DOI: http://doi.org/10.12928/telkomnika.v11i4.1153
Refbacks
- There are currently no refbacks.
This work is licensed under a Creative Commons Attribution-ShareAlike 4.0 International License.
TELKOMNIKA Telecommunication, Computing, Electronics and Control
ISSN: 1693-6930, e-ISSN: 2302-9293
Universitas Ahmad Dahlan, 4th Campus
Jl. Ringroad Selatan, Kragilan, Tamanan, Banguntapan, Bantul, Yogyakarta, Indonesia 55191
Phone: +62 (274) 563515, 511830, 379418, 371120
Fax: +62 274 564604