Induction Heating Process Design Using COMSOL® Multiphysics Software
Abstract
Induction heating is clean environmental heating process due to a non-contact heating process. There is lots of the induction heating type that be used in the home appliance but it is still new technology in Indonesia. The main interesting area of the induction heating design is the efficiency of the usage of energy and choice of the plate material. COMSOL® Multiphysics Software can be used to simulate and estimate the induction heating process. Therefore, the software can be used to design the induction heating process that will have a optimum efficiency. The properties of the induction heating design were also simulated and analyzed such as effect of inductor’s width, inductor’s distance, and conductive plate material. The result was shown that the good design of induction heating must have a short width and distance inductor and used silicon carbide as material plate with high frequency controller.
Full Text:
PDFReferences
Lucia O., Burdio J.M., Millan I., Acero J., and Puyal D., Load-Adaptive Control Algorithm of Half-BridgeSeries Resonant Inverter for Domestic Induction Heating, IEEE Transactions on Industrial Electronics. 2009; 56(8): 3106-3116.
Savia D. J., Induction Heating of Samples in Vacuum Systems. In The Proceeding of the COMSOL Users conference 2007 Grenoble, 2007.
Barragan LA., Navarro D., Acero J, Urriza I, and Burdio J.M, FPGA Implementation of a Switching Frequency Modulation Circuit for EMI Reduction in Resonant Inverters for Induction Heating Appliances, IEEE Transactions on Industrial Electronics. 2008; 55(1):11-20.
Jankowski, T. A. and Others. Experimental Observation and Numerical Prediction of Induction Heating in Graphite Test Article. In The Proceeding of the COMSOL conference 2009 Boston, 2009.
Fabbri M., Forzan M., Lupi S., Morandi A., and Ribani P.L., Experimental and Numerical Analysis of DC Induction Heating of Aluminum Billets, IEEE Transactions on Magnetics. 2009; 45(1): 192-200.
Rivera M.J., López Molina J.A., Trujillo M, Romero-Garcia V., And Berjano E.J., Analytical Validation of COMSOL Multiphysics for Theoretical Models of Radio Frequency Ablation Including the Hyperbolic Bioheat Transfer Equation, 32nd Annual International Conference of the IEEE EMBS. Buenos Aires. 2010: 3214 – 3217.
Syaifudin A.R.M., Mukhopadhyay S.C., Yu P.L, Electromagnetic Field Computation using COMSOL Multiphysics to Evaluate the Performance of Novel Interdigital Sensors, Applied Electromagnetics Conference (AEMC). Kolkata. 2009:1-4.
Renmin Li, Lei Fang, Songyu Liu , Hydrogeologic Parameters Inverse Analysis Based on Pumping Test by Comsol Multiphysics and Matlab, 2010 International Conference On Computer Design And Appliations. Hebei. 2010; 2: 160-163.
Ernest, R., Perrier, D., Feigenblum, J., and Hemous, R. 3D Inductive Phenomena Modelling. In The Proceeding of the COMSOL Users conference 2006, Paris, 2006.
Rudnev V. I. Handbook of Induction Heating. Marcel Dekker Inc, 2003.
Leinhard IV, J H and Leinhard V, J.H. A Heat Transfer Textbook, Massacushetts, 2006.
Jungwirth, M. and Hofinger, D. 2007. Multiphysics Modelling of High-Frequency Inductive Device. The Proceeding of the COMSOL Users conference 2007 Grenoble, 2007.
Mingyu Li, Hongbo Xu, Lee S.-W.R., Jongmyung Kim, and Daewon Kim, Eddy Current Induced Heating for the Solder Reflow of Area Array Packages, IEEE Transactions on Advanced Packaging. 2008; 31(2): 399-403.
DOI: http://doi.org/10.12928/telkomnika.v9i2.704
Refbacks
- There are currently no refbacks.
This work is licensed under a Creative Commons Attribution-ShareAlike 4.0 International License.
TELKOMNIKA Telecommunication, Computing, Electronics and Control
ISSN: 1693-6930, e-ISSN: 2302-9293
Universitas Ahmad Dahlan, 4th Campus
Jl. Ringroad Selatan, Kragilan, Tamanan, Banguntapan, Bantul, Yogyakarta, Indonesia 55191
Phone: +62 (274) 563515, 511830, 379418, 371120
Fax: +62 274 564604