Design and Analysis of Broadband Elliptical Microstrip Patch Antenna for Wireless Communication

Ali Khalid Jassim, Raad H. Thaher

Abstract


In this paper presents the design and manufacture of a new broadband elliptical patch antenna with a microstrip feed line and optimum antenna  parameters. The antenna dimension of (30×21×1.6) mm3 and fabricated on an FR-4 epoxy substrate having relative dielectric constant ε_r=4.3, loss tangent tan (δ) =0.002 and the feed line used has characteristic impedance of 50Ω.The designed antenna has the capability of operating in the bandwidth (6.95 - 30.94) GHz and the gain (6.8) dBi. The antenna performance was modified by inserting a slots in the ground plane to achieve impedance bandwidth (when S11≤ -10dB) and slots to patch to improve the gain. The modified antenna was designed to be used for fifth generation (5G) mobile communication. The simulation results are obtained using CST software.

Keywords


microstrip antenna; SWR; field configuration; elliptical patch antenna; radiation pattern;

Full Text:

PDF


DOI: http://doi.org/10.12928/telkomnika.v16i6.9246

Refbacks

  • There are currently no refbacks.


Creative Commons License
This work is licensed under a Creative Commons Attribution-ShareAlike 4.0 International License.

TELKOMNIKA Telecommunication, Computing, Electronics and Control
ISSN: 1693-6930, e-ISSN: 2302-9293
Universitas Ahmad Dahlan, 4th Campus
Jl. Ringroad Selatan, Kragilan, Tamanan, Banguntapan, Bantul, Yogyakarta, Indonesia 55191
Phone: +62 (274) 563515, 511830, 379418, 371120
Fax: +62 274 564604

View TELKOMNIKA Stats