A Dual-band Microstrip Slotted Antenna for UHF and Microwave RFID Readers

Ahmed El Hamraoui, El Hassane Abdelmounim, Jamal Zbitou, Laarbi Elabdellaoui, Hamid Bennis, Mohamed Latrach

Abstract


In this paper a new and simple dual-band microstrip slot antenna design combined with two inverted L-shaped slots integrated in the radiating patch is presented. This antenna is suitable for operating at 915 MHz and 2.45 GHz in order to cover the Radio Frequency Identification (RFID) frequencies bands. By optimizing the structure design, good performances in term of return loss radiation pattern and efficiency are achieved. The simulation results were obtained by using ADS and CST Microwave Studio electromagnetic solvers. The proposed antenna is mounted on an FR4 substrate with dielectric permittivity constant 4.4, thickness of 1.6 mm and loss tangent of 0.025 and a total area of 48×47 mm2. The design methodology used to achieve the dual-band antenna and both experimental, simulated results are presented.


Keywords


antenna; dual-frequency operation; microstrip fed; L-shaped slot; RFID (radio frequency identification), slot antenna

Full Text:

PDF


DOI: http://doi.org/10.12928/telkomnika.v16i1.7310

Refbacks

  • There are currently no refbacks.


Creative Commons License
This work is licensed under a Creative Commons Attribution-ShareAlike 4.0 International License.

TELKOMNIKA Telecommunication, Computing, Electronics and Control
ISSN: 1693-6930, e-ISSN: 2302-9293
Universitas Ahmad Dahlan, 4th Campus
Jl. Ringroad Selatan, Kragilan, Tamanan, Banguntapan, Bantul, Yogyakarta, Indonesia 55191
Phone: +62 (274) 563515, 511830, 379418, 371120
Fax: +62 274 564604

View TELKOMNIKA Stats