Numerical Simulation of Chip Formation in Metal Cutting Process

Zhao Yongjuan, Pan Yutian Pan Yutian, Huang Meixia

Abstract


In order to study the chip formation mechanism in metal cutting process, based on finite element software ABAQUS, the paper established finite element model and carried out numerical simulation on serrated chip formation of Ni-base superalloy GH4169 and ribbon chip formation of 45# steel respectively. In addition, this paper also analyzed the influence law of three factors (cutting speed, feed rate, back cutting depth) on cutting force and the distribution rule of cutting heat in serrated chip formation of GH4169.

Full Text:

PDF

References


Zhoujun, Xinglei. Metal chip process simulation research based on finite element. Jiamusi university journal (natural science edition). 2008, 03.

Liu Jiafu ,Zhang Hongcai, Yuan Junhong, Ren Huaiwe. Two dimensional metal cutting finite element analysis based on ABAQUS. Machine design and manufacture. 2006, 10.

He Qingxi.Numerical Simulation of 45# steel chip formation in high speed cutting process.

Huang Zhigang, Ke Yinglin, Wang Litao. Relative technique research on finite element simulation of metal cutting machining. Chinese machine engineering. 2003, 10

Lv Lihui,Qi Houjun,Liu Xinling. Finite element analysis of high-speed hardening cutting parameter effect .Mechanical engineer. 2008, 03

Liming, Zheng Huiming, Yu Donghui, Xiong Caihua. Finite element analysis on cutting force of high-speed cutting AISI4340 steel. Modern manufacture engineering. 2008, 06.

Hoshang Kolivand, Mohd Shahrizal Sunar, An Overview on Base Real-Time Hard Shadow Techniques in Virtual Environments. TELKOMNIKA. 2012; 10(1): 171-178.

W Wenyuan, W Fangmei. Maximum Entropy Method of Image Segmentation Based on Genetic Algorithm. Computer Simulation. 2011, 8(28).

Mardiyono Mardiyono, Reni Suryanita, Azlan Adnan. Intelligent Monitoring System on Prediction of Building Damage Index using Artificial Neural Network. TELKOMNIKA. 2012; 10(1): 147-154.

Zhoujun, Xinglei. Metal chip process simulation research based on finite element. Jiamusi university Journal (natural science edition). 2008, 03.




DOI: http://doi.org/10.12928/telkomnika.v10i3.827

Refbacks

  • There are currently no refbacks.


Creative Commons License
This work is licensed under a Creative Commons Attribution-ShareAlike 4.0 International License.

TELKOMNIKA Telecommunication, Computing, Electronics and Control
ISSN: 1693-6930, e-ISSN: 2302-9293
Universitas Ahmad Dahlan, 4th Campus
Jl. Ringroad Selatan, Kragilan, Tamanan, Banguntapan, Bantul, Yogyakarta, Indonesia 55191
Phone: +62 (274) 563515, 511830, 379418, 371120
Fax: +62 274 564604

View TELKOMNIKA Stats