Characteristics MIMO 2x4 Antenna for 5G Communication System

Yusnita Rahayu, Jodi Wijaya, Elsa Syafitri

Abstract


This paper presents the characteristic MIMO 2x4 antenna for 5G communication system. The proposed antenna works at 28 GHz and simulated by using CST simulation software. The antenna uses RT Duroid 5880 substrate with dielectric constant of 2.2. The MIMO antenna consists of eight elements with rectangular patches and inset feeding. The dimension of patch (Wp x Lp) is 6 mm x 8 mm. There are three (3) antenna configurations derived in this paper such as; single element, 1x4 elements and 2x4 elements. The MIMO 1x4 elements antenna configuration is designed based on the single element antenna with the distance between center to center elements antennas of 5 mm. The MIMO 2x4 antenna is formed from the MIMO 1x4 element configuration with the opposite direction. The 2x4 element antenna, a distance between opposite antenna elements is 10 mm. From the simulation results, it is shown that by increasing the number elements of antenna affect to the directivity and the return loss. Antenna with 2x4 elements has 14 dBi of directivity with the return loss of -19 dB. While antenna with 1x4 elements, the directivity obtained is 14.3 dBi with return loss of -18 dB.


Keywords


MIMO antenna; 5G antenna; 28 GHz; microstrip antenna

Full Text:

PDF


DOI: http://doi.org/10.12928/telkomnika.v16i4.8377

Refbacks

  • There are currently no refbacks.


Creative Commons License
This work is licensed under a Creative Commons Attribution-ShareAlike 4.0 International License.

TELKOMNIKA Telecommunication, Computing, Electronics and Control
ISSN: 1693-6930, e-ISSN: 2302-9293
Universitas Ahmad Dahlan, 4th Campus
Jl. Ringroad Selatan, Kragilan, Tamanan, Banguntapan, Bantul, Yogyakarta, Indonesia 55191
Phone: +62 (274) 563515, 511830, 379418, 371120
Fax: +62 274 564604

View TELKOMNIKA Stats