Statistical MOSFET Parameter Extraction with Parameter Selection for Minimal Point Measurement
Abstract
A method to statistically extract MOSFET model parameters from a minimal number of transistor I(V) characteristic curve measurements, taken during fabrication process monitoring. It includes a sensitivity analysis of the model, test/measurement point selection, and a parameter extraction experiment on the process data. The actual extraction is based on a linear error model, the sensitivity of the MOSFET model with respect to the parameters, and Newton-Raphson iterations. Simulated results showed good accuracy of parameter extraction and I(V) curve fit for parameter deviations of up 20% from nominal values, including for a process shift of 10% from nominal.
Full Text:
PDFReferences
Schlichtmann U, Schmidt M, Kinzelbach H, Pronath M, Glockel V, Dietrich M, Eichler U, Haase J. Digital design at a crossroads: How to make statistical design methodologies industrially relevant. Design, Automation & Test in Europe Conference & Exhibition.2009, pages 1542-1547.
Kocher M, Rappitsch G.Statistical methods for the determination of process corners.Proceedings of International Symposium on Quality Electronic Design. 2002, pages 133-137.
Asenov P, Kamsani N.A, Reid D, Millar C, Roy S, Asenov A.Combining process and statistical variability in the evaluation of the effectiveness of corners in digital circuit parametric yield analysis. Proceedings of the European Solid-State Device Research Conference (ESSDERC). 2010, pages 130-133.
Teh Eng Hooi, Cheah Fook Nyen, Lee Wei Tsun. What's Next After Process Characterization, 32nd IEEE/CPMT International Electronic Manufacturing Technology Symposium, IEMT '07. 2007, pages 8-13.
Sarfaty M, Shanmugasundra, A, Schwarm A, Paik J, Jimin Zhang, Rong Pan, Seamons M.J, Li H, Hung R, Parikh S.Advanced Process Control solutions for semiconductor manufacturing.Advanced Semiconductor Manufacturing 2002 IEEE/SEMI Conference and Workshop.2002, pages 101- 106.
Yener S, Kuntman H. Algorithms on the extraction of BSIM MOSFET model parameters via measurement data. International Conference on Electrical and Electronics Engineering, ELECO 2009. Nov 2009, pages II-237-II-241.
Jiwei Sun, Xinzhang Jia, Zhiyun Li, Hailong You. Co-extraction method for DC model parameters of BJT based on global optimization and physical analysis.IEEE International Conference of Electron Devices and Solid-State Circuits, EDSSC 2009. Dec 2009, pages 433-436, 25-27.
Stenbakken Gerard N, Souders Micheal T. Developing linear error models for analog devices. IEEE Transactions on Instrumentation and Measurement.April 1994; 43(2):157-163.
Spaandonk J. van, Kevenaar T.A.M. Selecting measurements to test the functional behavior of analog circuits. Journal of Electronic Testing: Theory and Applications.1996; 9:9-18.
Felt Eric, Sangiovanni-Vincentelli Alberto. Testing of analog systems using behavioral models and optimal experimental design techniques. Proceedings of 1994 IEEE International Conference on Computer-Aided Design, 1994: 672-678.
Stenbakken Gerard N, Souders MichealT. Test-point selection and testability measures via QR factorization of linear models. IEEE Transactions on Instrumentation and Measurement. June 1987, IM-36(2):406-410.
David Kincaid and Ward Cheney. Numerical Analysis. Brooks/Cole Publishing Company, 1991.
DOI: http://doi.org/10.12928/telkomnika.v11i3.984
Refbacks
- There are currently no refbacks.
This work is licensed under a Creative Commons Attribution-ShareAlike 4.0 International License.
TELKOMNIKA Telecommunication, Computing, Electronics and Control
ISSN: 1693-6930, e-ISSN: 2302-9293
Universitas Ahmad Dahlan, 4th Campus
Jl. Ringroad Selatan, Kragilan, Tamanan, Banguntapan, Bantul, Yogyakarta, Indonesia 55191
Phone: +62 (274) 563515, 511830, 379418, 371120
Fax: +62 274 564604